MATERIAL HANDLING MANUFACTURERS
RESINDEK® FLOORING DELIVERS SUPERIOR DURABILITY FOR MATERIAL HANDLING RACKING AND MEZZANINE MANUFACTURERS
You already manufacture the highest quality, elevated industrial work platforms, rack supported pick modules, and mezzanines, so why use anything less than the industry standard for a durable, long wearing floor surface: ResinDek® engineered wood flooring panels.
ResinDek flooring provides a perfectly level surface that handles loads from 2,000 to 8,000 pounds while providing exceptional wear resistance under heavy loads, rolling carts, pallet jacks, and robotic vehicles. They also won't delaminate like polydeck; splinter and show stains like plywood; and generate less noise than bar grating or concrete surfaces as loads pass over them.
Your project includes comprehensive layout and installation drawings, design and product selection recommendations, logistics and jobsite support, and customization capabilities. Extensive testing and certifications validate the durability of our innovative ResinDek flooring panels, which are backed by a 10-year warranty.
RESINDEK® FLOOR PANELS
ResinDek composite engineered wood panels has been validated by SCS Global Services to contain no added compounds using urea formaldehyde or phenol formaldehyde in conformance to the SCS No Added Formaldehyde and No Added Urea Formaldehyde Verification Guidelines. Thus, helping companies earn points for LEED® qualified buildings. In addition to being certified by SCS Global Services when required ResinDek panels are available with FSC® Certification under the license code FSC-C124474.
RESINDEK FLOORING PANELS - For Use with Corrugated B-Deck
ResinDek® LD
3/4" Thick Panel
Robot loads up to 500 lbs.
Pallet loads up to 2,000 lbs.
ResinDek® SD
Loads Up to 3,500 lbs.
ResinDek® MD
3/4" Thick Panel
Robot loads up to 2,000 lbs.
Pallet loads up to 3,500 lbs.
ResinDek® HD
3/4" Thick Panel
Robot loads up to 4,000 lbs.
Pallet loads up to 4,500 lbs.
ResinDek® MAX
1-1/2" Thick Panel
Robot loads up to 6,000 lbs.
Pallet loads up to 8,000 lbs.
* Loads above include both weight of pallet jack + product.
RESINDEK FLOORING PANELS - Single Panel Solution - No Corrugated B-Deck Required
ResinDek® Xspan®
1-1/8" Thick Panel
Robot loads up to 2,500 lbs.
Pallet loads up to 3,000 lbs.
ResinDek® Xspan® FR
1-1/8" Thick Panel
Robot loads up to 2,500 lbs.
Pallet loads up to 3,000 lbs.
* Loads above include both weight of pallet jack + product and are calculated on 16" beam spacing.
RESINDEK® FLOOR FINISHES
Designed and engineered for heavy rolling pallet jacks, Gray Diamond Seal® Antistatic is the standard by which all other coatings in our industry are measured. If electrostatic dissipative is required, then choose Gray Diamond Seal ESD. If your project includes pallet flow areas or drop zones, choose ResinDek with MetaGard® GVT. If you need the most economical solution and still want a 10-year product warranty, choose ResinDek UF (unfinished). If you customer will be using mobile robots on mezzanines or work platforms, then specify TriGard ESD for AMRs and AGVs or MetaGard® SST for excessive wear areas or debris is not routinely cleaned.
FOR HEAVY EQUIPMENT, STORAGE, ROLLING CARTS & PALLET JACKS
Gray Diamond Seal® Coating
Gray Diamond Seal® ESD Coating
MetaGard® Steel Decking Surface - GVT
Unfinished
FOR AGV & AMR ROBOTIC TRAFFIC
RESINDEK® SHELVING SYSTEM
ResinDek Shelving System consists of three components, ResinDek horizontal shelving, ResinDek vertical dividers, and lumber supports. It can accommodate shelf heights of 6" to 20", shelf depths from 8" to 60", and vertical divider spaces from 4" on center to 48" on center. Custom machining allows installation without the use of hardware.
RELATED VIDEOS
ResinDek Flooring Panels Inside a Distribution Center | Video Length: 4:09
Elevated Flooring Solutions for AGVs and AMRs | Video Length: 2:54
